Liquid Rubber Concrete Foundation and Basement Sealant – Indoor & Outdoor Waterproof Coating, Easy to Apply, Black, 1 Gallon
PROTECTIVE FINISH FOR – Foundations, ICF’s, Basements, Shower Liners, Deck and Fence Posts, Planter Boxes, Metal, Wood, Concrete and more
HIGHLY FLEXIBLE – Sealant final membrane has over 900% elongation in the sealing material preventing adhesion failure causing cracks and taring. Flat/Ponding Surface: 50 sq ft/G per coat
EASY TO APPLY – No mixing required! Apply by brush, roller or high quality piston paint sprayer. Container can be closed and left over material used later. No pot life or working time like 2 component products
ENVIRONMENTALLY FRIENDLY – Liquid Rubber Foundation Sealant is water based, containing no solvents, VOC’s or harmful odors. Safe for humans and pets alike, can be used indoors and outdoors with no special breathing apparatus
FOR A BULLETPROOF SYSTEM – Bridge joints, seams, vents, gaps, protrusions…. With Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile where possible movement may occur. Scroll down for full application steps
Liquid Rubber Foundation Sealant is an environmentally friendly coating that is easily brushed on and cures into a waterproof membrane. It can be used in many applications where you need to create a watertight seal. Foundations, ICF’s, Basements, Shower Liners, Deck and Fence Posts, Planter Boxes, Metal, Wood, Concrete and more. Use Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile to bridge seams, joints, vents, protrusions to create a long lasting repair or rejuvenation.
Apply when temperature is above 40F/5C. Apply to a dry surface, free of dirt, loose flaky paint and coatings, oil, grease, silicone, coal tar or other contaminants. Typically cures within 24-48 hrs.
Do not freeze. in a warm area. Do not apply in wet conditions or if rain is forcasted within 24 hrs.
Not meant as a constant walking surface or for long term exposure to UV.
Coverage – Flat/Ponding Surface – 15 sq ft/G per coat. Apply 4-5 heavy coats to achieve a 60-80 mil. (1.5-2.0mm) membrane.
Vertical Surfaces: Exterior – 20 sq ft/G per coat. Apply 3-4 heavy coats to achieve a 40-60 mil. (1.0-1.5mm) membrane. Interior – 50 sq ft/G per coat. Apply 2-3 heavy coats to achieve a 20-30 mil. (0.5-0.76mm) membrane.
Apply next coat when dry to touch and nothing is wet underneath; tacky is okay.
Generally 12-24 hrs between heavy coats. Amounts vary depending on surface roughness.
Use all material up to achieve a long lasting membrane.
Avoid hot, direct, intense sunlight during application. Remove Painters Tape while still wet.
Clean Up – Use soap and water or mineral oil to clean skin.
100% MONEY BACK – If you need to return anything, we’ll your full order amount. We ask the material be unopened, in new condition and you ship the product back to us within 90 days. We offer 5 Star Customer Support, Videos and Application Guidance.
We offer FREE shipping on all orders!
We ship within Three business days of payment, usually sooner.
We use a selection of shipping services such as UPS, FedEx, USPS etc.
We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
Local pickups and combined shipping options are not provided at this time.
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
We accept payment by any of the following methods:
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.
If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.
Please visit our eBay store to check out other items for sale!
Thank you for shopping at our store.