HILTI Crack Repair Kit.
Hilti basement wall crack repair kit.
RE-500 SD is the professional all around concrete anchor adhesive. It is 4x the strength of concrete and flows into cracks and fills them and adheres them together.
You first drill 3/8” holes into the crack every 12”
Then clean the cracks with a vacuum
Washing the crack with water is great too but it must dry before injecting the epoxy
Then inject into the holes until it squeezes out and move to the next hole
Smear any excess into areas where it didn’t fill and you have a repaired wall
I was thinking this might save DIY people some money on their crack repair.
It is important to make sure your property slopes away from the wall because that will help prevent any new cracks from forming.
For reference the epoxy retails for $300 and the injection tool is $175 I have this left from my wall repair project. The epoxy is past it’s expiration date which is only a few months after it is sold but it works just as good as the unexpired epoxy. This is not your Ace Hardware 5 Minute epoxy it cures in 8 hours and is significantly stronger.